You can download applications and software for your controllers here.

Make sure that your controller is set to PC mode. The Mode switch (on the underside of the controller) must be set to the third position (PC).

The Revolution Pro Controller 3 is compatible with all PC games that are XInput compatible.

1. Make sure that the cable is correctly fixed to your controller and connected to your PlayStation 4 console.
2. Press the PS button to synchronize the controller.

The audio feature works only on PlayStation 4. It is not supported on PC.

1. Make sure that the Mute function is deactivated on the remote control of your headset.
2. Go to the settings of your PlayStation 4 system to make sure that the microphone level is not set at its minimum.

With the PC/Mac companion app, make sure that the response curves of the joysticks are configured correctly.

1. Make sure that the volume of your headset is not set at the minimum level.
2. Make sure that the settings of the audio output of your PlayStation 4 system are correctly configured for your headset and that the volume is not set at the minimum level.

Unplug the controller and plug it again. The controller will be recognized again.

If it doesn't work, contact the support team.

1. Open the companion app.
2. Go to Updates.
3. Make sure that the firmware number is not V0.00.

If the firmware number is V0.00, follow these steps:

1. Close the companion app.
2. Click Control panel > Peripherals and Printers.
3. Delete the Revolution Pro Controller 3 device.
4. Disconnect the controller.
5. Plug the controller into your PC again.
6. Wait until the driver installation is finished.
7. Launch the companion app. If the firmware number is back, the communication with the Revolution Pro Controller 3 works again.
8. Update your controller profiles.

No, the PS Remote Play app is dedicated for use with PlayStation 4 and PlayStation 5 controllers. It is not supported by any other controllers.

No, it doesn't support the macro feature because it isn't compatible with Esport regulations.

The only way to reset this controller is to disconnect and reconnect it.