1. Remove the ear cups from the headband frame.
2. Put one end of the new speaker cushion material into the plastic groove on the ear cup and hold it in place.
3. Pull and stretch the rest of the speaker cushion around the groove until the material is fully in it. To make sure that the material is correctly in place, give the speaker cushion a light turn.
4. Put the ear cups back into the headband frame.
5. Make sure that the ear cups are correctly in place. When you extend the microphone, it must be pointing away from the RIG logo on the headband frame and not towards it.

The RIG 700 HX headset is compatible with PC, Xbox One and Xbox Series X|S. Due to circuitry differences between Xbox and PlayStation consoles, it is not compatible with PlayStation consoles.

The RIG 700 HX headset 2021 edition features the following changes and additions:

• Improved design and finish
• USB-stick style 2.4 GHz RF wireless adapter
• Separate master volume dial
• Mic monitoring dial
• Mute button

You can also adjust mic monitoring by pressing and holding the mute button.

Check the basic connections

• If the microphone is removable, make sure that it is fully inserted and is facing the correct way.
• Put the microphone no more than 3-5cm away from your mouth.
• Make sure that the microphone isn't muted on the headset.
  On RIG 700 headsets, the microphone button is at the bottom of the headset. Press it once until you hear a beep.
• If the microphone is removable, turn up mic monitoring on your headset until the microphone detects your voice. If it doesn't detect your voice, there may be an issue with the microphone and it can be replaced.
• Reconnect the headset.
  1. Turn off the headset.
  2. Unplug the receiver from the console or PC.
  3. Wait 15 seconds.
  4. Plug the receiver again.
  5. Turn on the headset.

Check the settings on the console

Xbox

Make sure that the headset is assigned to the correct user profile.

PlayStation 4

Go to Settings > Sound/Devices > Adjust Mic Level.

PC

From your chat application, make sure that you assigned the correct microphone and that it is not muted.

1. Power on the headset.
2. The button on the bottom of the left ear cup is the mic monitoring adjustment button. It is pre-set to Medium.
   
   Press and hold the button until you hear the audible tones.
   
   • One tone: Low.
   • Two tones: Medium.
   • Three tones: High.
3. Speak into the microphone to test each setting and find the optimal level of mic monitoring for your preference.

Dolby Atmos is compatible only with Xbox and Windows 10/11.

1. Download the Dolby Access app.
   • On PC, you can download it from the Microsoft store here.
   • On Xbox, you can download it from the Xbox store or the Microsoft store.
2. Connect your headset to your PC or console.

When the headset is connected, Dolby Access detects it and activates Dolby Atmos for Headphones.

Xbox One

PC / Mac